How to Fix Pay Compression Without Blowing Up Your Salary Ranges
Compression shows up when new-hire offers climb toward what long-tenured staff earn. This guide walks through diagnosing it against your ranges and phasing a documented fix.
Rovaryn Digital · November 3, 2026 · 9 min read

The offer that landed above your longest-serving employee
You approve an offer for a new analyst on a Thursday. The candidate had a competing number, the range midpoint was the only defensible place to land, and the hire accepts by Friday. On Monday, someone in payroll notices the new analyst will earn slightly more than a colleague who has been in the same role for six years, consistently rated well, and who trained two of the people hired since.
Nobody did anything wrong. The market moved, your posted range moved with it, and the new hire was placed where the market said they belonged. The incumbent's pay rose with 3% merit increases that were smaller than the market's jump. Now you have a person who may find out, a manager who is already uneasy, and a salary range that suddenly looks like it has two different rules for entering and staying.
This is pay compression, and for most small teams it arrives quietly, one offer at a time. The fix does not require a new pay structure or blanket raises. This guide shows how to fix pay compression: find it in your own data, size it against your ranges, pick the right remedy, and phase and document the adjustment so it holds up later.
What pay compression is, and how common it is
Pay compression is a narrowing of the pay difference between people who should be paid differently: new hires and long-tenured staff in the same role, or employees and the managers above them. The most common version is the one in the story above, where entry pay catches up to or passes what experienced people earn.
It is not rare. In Pearl Meyer's 2022 College Graduate and Intern Compensation Survey, 60.9% of organizations reported experiencing pay compression. If you are looking at your own payroll and finding it, you are in the majority.
The cost shows up in retention. Pearl Meyer has noted that salary compression can lead to lower productivity and morale and higher turnover. Compression tends to show up first in roles where the external market moves fast, so check those job families first.
Compression is a pattern in the structure, not a failing of any one manager, and it compounds. Each new offer placed at a market-driven number pulls the floor under incumbents higher without anything changing for them, so ignoring it for another cycle usually makes the eventual fix larger.
Diagnose pay compression against your ranges, not against each other
The instinct is to compare the new hire's salary with the incumbent's salary. That comparison tells you there is a gap, but not whether the gap is a problem. A range gives you the second half of the answer: where each person sits inside the structure you have already committed to. Two measures do the work, and both are simple enough to run in a spreadsheet.
Compa-ratio is current salary divided by range midpoint, multiplied by 100. A compa-ratio of 100 means the person is paid exactly at midpoint. Lower means below it, higher above. The compa-ratio explainer covers the interpretation in detail, and the midpoint guide explains why the midpoint is the anchor for the whole calculation.
Range penetration is how far through the range a person has traveled: (salary minus range minimum) divided by (range maximum minus range minimum). It shows position in the band in a way that compa-ratio can hide when ranges are wide. The range penetration guide shows how to track it across a team.
A worked example
These figures are invented round numbers to demonstrate the method, not market data. Suppose a role has a range of $60,000 minimum, $75,000 midpoint and $90,000 maximum. An incumbent with six years in the role earns $68,000. A new hire starts at $70,000.
- Incumbent compa-ratio: $68,000 ÷ $75,000 × 100, about 90.7. Range penetration: ($68,000 − $60,000) ÷ $30,000, about 27%.
- New hire compa-ratio: $70,000 ÷ $75,000 × 100, about 93.3. Range penetration: ($70,000 − $60,000) ÷ $30,000, about 33%.
The new hire is ahead on both measures, and the incumbent has six years of performance and context that the new hire does not. That inversion, not the $2,000 difference itself, is your diagnostic signal. Run the same two calculations for every employee in the role, sort by tenure, and look for the pattern: if experience and position in the range move in opposite directions, compression is present.
What to flag
Build a short list for each job family: anyone whose compa-ratio sits below a newer colleague's in the same role, anyone clustered tightly near the bottom of a range despite long tenure, and any case where a direct report earns close to or more than their manager. Flag those cases for review; do not adjust anyone yet.
Separate real compression from other causes before spending money
Not every inversion is compression. Before you size a fix, rule out the explanations that call for a different response.
- A genuine skill or scope difference. The new hire may bring a certification or responsibility the role needs, and the incumbent may do narrower work. That can justify a different placement, or a different job level.
- A range that has drifted. If the range itself is stale, the new hire's pay looks high relative to an outdated midpoint. The first move is to refresh the range from current wage data, then re-measure.
- A performance difference. An incumbent rated below expectations may be paid where the structure says they should be.
- A pay-equity pattern. If the people on the short end share a characteristic, treat that as a separate review. The pay equity audit guide lays out how to look.
What remains after you exclude those is the compression you need to fix. The remaining list is often shorter than the first flag list.
How to fix pay compression in phases without moving the ranges
The core principle is that the range is the stable thing and the individual pay moves toward the right position inside it. You are adjusting people, not rewriting the structure. That is what keeps the ranges defensible: you are moving employees to where the range already says they belong.
Pick a target position
For each person on the reviewed list, set a target compa-ratio or range-penetration level that reflects their role, tenure and performance. One common approach is a floor for fully proficient long-tenured staff at or near midpoint, with top performers going beyond it. The right target is a judgment for your company, and it should be written down so you apply it the same way to everyone.
In the worked example, suppose the target for a six-year, well-rated incumbent is a compa-ratio of 95. That is $75,000 × 0.95, or $71,250, which is $3,250 above the incumbent's current $68,000. That also puts the incumbent above the new hire at $70,000, restoring the order the structure implies.
Choose a remedy
There are three common ways to close the gap, and they can be combined.
- Targeted market adjustment. Raise the affected incumbents to their target position outside the normal merit cycle. This is the fastest and the most visible. It costs the most up front.
- Weighted merit. Give affected employees a larger share of the next merit pool than their peers, so the gap closes through the normal cycle. This costs nothing extra but takes longer, and it only works if the pool is big enough to absorb the weighting.
- Placement discipline going forward. Place new hires lower in the range unless there is a documented reason, so you stop creating new compression while you repair the old. This costs nothing, and it only prevents further damage.
The first two can be combined, and the third is worth doing immediately.
Phase the adjustment
If the full correction does not fit the budget, spread it over two or three steps. Using the worked example, you might give half of the $3,250 now and the rest at the next scheduled review. Write the plan down before the first step so employees and managers can see a path, not a one-time gesture; a half-fix with no stated second step can read as a refusal.
Watch the ceiling
Raising incumbents toward their targets pushes some of them toward the top of their range. Check each person's range penetration after the adjustment. If someone ends up near the maximum, the next move for them is a promotion or a range change, not another increase. The HR operations resource hub collects related guides.
Document every adjustment so it holds up later
Any plan for how to fix pay compression is a set of pay decisions like any other, and it will be questioned: by the employee who did not get one, by a manager who thinks their team was overlooked, by a board member reviewing spend. Keep the record that answers all three.
For each adjustment, capture the role and range used, the person's before and after compa-ratio and range penetration, the reason code (compression, as distinct from merit or promotion), the target-position rule you applied, who approved it, and the date. Keep the list of people you reviewed and did not adjust, with the reason, to show the rule was applied consistently.
Also record the date of the range and the wage data behind it. If the range was refreshed as part of the exercise, the adjustment is only as defensible as the numbers it was measured against. This is a description of good practice, not legal advice. If you have questions about how a particular pay change interacts with employment or pay-equity rules where you operate, confirm with qualified counsel or the relevant agency.
Run the diagnosis with a structured workbook
If you would rather not build the calculations from scratch, the Pay Compression Diagnostic & Remediation Workbook is a downloadable template from the SalaryRange store, designed to pair with a SalaryRange account. The store describes it simply: compression is what happens when the market moves and your incumbents do not. You fill it in manually with your own roles and pay data.
Download the Pay Compression Diagnostic & Remediation Workbook to run the diagnosis, size the fix and keep a record of how you fix pay compression in your own ranges.
Get new guides in your inbox
One email when a new article goes live. Unsubscribe with one click.


